Paragon Speaker Pop Mod

From the Ten-Tec Reflector May 4, 1998

After the post on audio pop on first digit in the Omni V , I decided to try the same fix on my early Paragon 1. I think my serial # is around 135.

Resistor R78 that Steve Ellington mentioned is R-90 on MY paragon IF / AF board. Put a 100K resistor to gnd from it, as he recommended, and that fixed my pop on first character. Radio sounds great!

Your milage may differ………be careful out there, as things are not always as the manual / schematic says! ……… :-)

Walt K8CV